Disassembly [11/2021 - ]: Procedure

Refer to PROCEDURE - Step 2

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

   1. As shown in the illustration, open the rear console armrest assembly.
   2. Disengage the 4 claws to remove the upper console retainer as shown in the illustration.

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Remove the 2 screws.
   2. Disengage the 3 claws.
   3. Check that the lock plate protrudes when the stopper is pushed.
   4. As shown in the illustration, push the release lever while closing the rear console armrest assembly.
   5. Remove the rear console armrest assembly.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Remove the 6 screws.
   2. Using a moulding remover, disengage the 4 claws as shown in the illustration to remove the console compartment door inner cover sub-assembly.