DTC B1500-13: Fuel Sender Circuit Open; DTC B1501-13: Sub Fuel Sender Circuit Open [11/2021 - ]: Description

for HEV Model

The fuel sender gauge assembly is connected to the combination meter assembly via direct line. If there is an open or short in the direct line, the combination meter assembly stores DTC B1500-13.

for Gasoline Model

The fuel sender gauge assembly and No. 2 fuel sender gauge assembly are connected to the combination meter assembly via direct line. If there is an open or short in the direct line, the combination meter assembly stores DTC B1500-13 or B1501-13.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	DTC Output from	Priority
B1500-13	Fuel Sender Circuit Open	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: Voltage signal from fuel sender gauge assembly is 0.2 V or less Voltage signal from fuel sender gauge assembly is 4.7 V or more Malfunction Time: 10 seconds or more	Fuel suction tube with pump and gauge assembly Fuel sender gauge assembly Harness or connector Combination meter assembly	Combination Meter	A
B1501-13	Sub Fuel Sender Circuit Open	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: Voltage signal from No. 2 fuel sender gauge assembly is 0.2 V or less Voltage signal from No. 2 fuel sender gauge assembly is 4.7 V or more Malfunction Time: 10 seconds or more	Fuel tank vent tube assembly No. 2 fuel sender gauge assembly Harness or connector Combination meter assembly	Combination Meter	A

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

Priority

B1500-13

Fuel Sender Circuit Open

Diagnosis Condition:

Malfunction Status:

Malfunction Time:

Combination Meter

B1501-13

Sub Fuel Sender Circuit Open

Diagnosis Condition:

Malfunction Status:

Malfunction Time:

Combination Meter