Installation [11/2021 - 03/2023]: Procedure

INSTALL SPARK PLUG

NOTE:

If a spark plug has been struck or dropped, replace it.

Torque: 20 N.m (204 kgf/cm, 15 ft.lbf)

INSTALL IGNITION COIL ASSEMBLY

Refer to PROCEDURE - Step 2
CONNECT ENGINE WIRE
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Refer to PROCEDURE - Step 54
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  Refer to INITIALIZATION [11/2021 - ]