LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronically Controlled Brake System - Diagnostic Codes (3 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C1240-00: Yaw Rate Sensor / Multi-axis Acceleration Sensor Module "A" [11/2021 - ] >> Description

DTC C1240-00: Yaw Rate Sensor / Multi-axis Acceleration Sensor Module "A" [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The airbag sensor assembly has a built-in yaw rate and acceleration sensor.

If the identification ID of the yaw rate and acceleration sensor (airbag sensor assembly) is different to that stored in the No. 2 skid control ECU (brake actuator assembly), this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Note
C1240-00 Yaw Rate Sensor / Multi-axis Acceleration Sensor Module "A" The yaw rate and acceleration sensor (airbag sensor assembly) identification information stored in the No. 2 skid control ECU (brake actuator assembly) is not consistent with the yaw rate and acceleration sensor (airbag sensor assembly) identification information sent via CAN communication continuously for 1 second or more.
  • Incorrect yaw rate and acceleration sensor (airbag sensor assembly) installed
  • No. 2 skid control ECU (brake actuator assembly)
Comes on Brake/EPB
  • SAE Code: C1240
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)