DTC C05C0-51: Brake Pedal Position Sensor "A" Not Programmed [03/2024 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
When the No. 1 skid control ECU (brake booster with master cylinder assembly) judges that the zero point calibration of the brake pedal stroke sensor assembly is incomplete, this DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Note |
|---|---|---|---|---|---|---|
| C05C0-51 | Brake Pedal Position Sensor "A" Not Programmed | The brake pedal stroke sensor assembly zero point calibration is not performed. (Normal brake pedal stroke sensor assembly zero point not memorized.) |
|
Does not come on | Brake Booster | Output ECU: No. 1 skid control ECU (brake booster with master cylinder assembly) HINT: During Dealer Mode, related DTCs are cleared. |