LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Control System - Diagnostic Codes (P0010-P0069)) >> SFI System >> DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 [03/2022 - ] >> Description

DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 [03/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-01.

Refer to DTC P0010-01: Camshaft Position "A" Actuator Bank 1 General Electrical Failure [03/2022 - ] 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0011-00 Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 With engine warmed up and while driving in urban area (engine speed 4000 rpm or less), intake side valve timing does not change in advanced position, and target and actual valve timing do not match (1 trip detection logic).
  • Camshaft timing gear assembly
  • ECM
Comes on
  • SAE Code: P0011
  • DTC for Mexico Models: Applies