LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Can Communication System - Circuit Tests (1 Of 9) & Diagnostic Codes) >> CAN COMMUNICATION SYSTEM (for HEV Model) >> Steering Angle Sensor Communication Stop Mode [11/2021 - ] >> Description

Steering Angle Sensor Communication Stop Mode [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Steering Angle Sensor Communication Stop Mode Communication stop for "Spiral cable (Steering Angle Sensor)" is indicated on the "Communication Bus Check" screen of the GTS.
Refer to DIAGNOSIS SYSTEM [11/2021 - 03/2023] , or refer to DIAGNOSIS SYSTEM [03/2023 - 03/2024] , or refer to DIAGNOSIS SYSTEM [03/2024 - ]
  • Steering sensor branch line or connector
  • Power source circuit of steering sensor
  • Steering sensor ground circuit
  • Steering sensor