LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Hybrid Battery Control System - Service Information (2 Of 2)) >> HV Battery Stack >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT HV SUPPLY STACK SUB-ASSEMBLY 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    1. Remove the HV supply stack sub-assembly.

      Refer to REMOVAL [11/2021 - ] 

    2. Inspect the HV supply stack sub-assembly.
      1. Check that no electrolyte is leaking from the No. 1 HV supply stack sub-assembly or No. 2 HV supply stack sub-assembly.
        GTY999682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *1 No. 1 HV Supply Stack Sub-assembly *2 No. 2 HV Supply Stack Sub-assembly
        *a Check Part - -

        OK

        There is no electrolyte leaking from the HV supply stack sub-assembly.

        HINT: 

        If the result is not as specified, replace the No. 1 HV supply stack sub-assembly or No. 2 HV supply stack sub-assembly.

    3. Install the HV supply stack sub-assembly.

      Refer to INSTALLATION [11/2021 - ]