LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Hybrid Battery Control System - Service Information (2 Of 2)) >> Fuse Box >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HYBRID BATTERY TERMINAL BLOCK 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    NOTE:

    Make sure that the connector is connected securely.
  2. INSTALL HV BATTERY JUNCTION BLOCK ASSEMBLY 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    NOTE:
    • Make sure that the connectors are connected securely.
    • If the HV battery junction block assembly has been struck or dropped, replace it with a new one.

    Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  3. CONNECT FLOOR WIRE 
    Refer to PROCEDURE - Step 8
  4. CONNECT FLOOR UNDER WIRE 
    Refer to PROCEDURE - Step 9
  5. INSTALL NO. 1 HV BATTERY COVER PANEL RH 
    Refer to PROCEDURE - Step 10
  6. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY 
    See step  4
  7. INSTALL BATTERY SERVICE COVER BOARD 
  8. INSTALL NO. 3 BATTERY SERVICE COVER BOARD 
  9. INSTALL REAR DOOR SCUFF PLATE LH 
  10. INSTALL NO. 2 BATTERY SERVICE COVER BOARD 
  11. INSTALL REAR DOOR SCUFF PLATE RH 
  12. INSTALL REAR SEAT CUSHION LOCK HOOK 
  13. INSTALL REAR SEAT CUSHION ASSEMBLY 
  14. INSTALL SERVICE PLUG GRIP 

    See step  1

  15. PERFORM INITIALIZATION 

    Refer to WORK PROCEDURE [11/2021 - 03/2023] , or refer to WORK PROCEDURE [03/2023 - 03/2024] , or refer to WORK PROCEDURE [03/2024 - ]

scientia non olet · About LEMON Manuals