LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Emission Control System - Service Information) >> Fuel Vapor Containment Valve >> Installation [11/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION) 

Fig 1: Fuel Vapor Containment Valve Installation Components With Torque Specifications (1 Of 2)
GTY1080143Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout - Procedure Part Name Code
1 FUEL VAPOR CONTAINMENT VALVE (CLOSE TANK WITH BOLT VALVE ASSEMBLY) 77070A - - -
2 FUEL TANK VENT HOSE SUB-ASSEMBLY 77404 See step  2 - -
3 FUEL TANK VENT HOSE SUB-ASSEMBLY 77404A See step  3 - -
N.m (kgf/cm, ft.lbf): Specified torque - -
Fig 2: Fuel Vapor Containment Valve Installation Components With Torque Specifications (2 Of 2)
GTY1074383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout - Procedure Part Name Code
4 FRONT FLOOR COVER LH 58166A - - -
5 ENGINE UNDER COVER HEAT INSULATOR 51468B - - -
6 NO. 2 ENGINE UNDER COVER ASSEMBLY 51420 - - -
N.m (kgf/cm, ft.lbf): Specified torque - -