Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Fuel Pump Installation Components With Torque Specifications (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	FUEL SUCTION TUBE SET GASKET	77169A	-	-	-
2	FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY	77020A	See step 2	-	-
3	FUEL PUMP GAUGE RETAINER	77144	See step 3	-	-
4	NO. 1 FUEL TUBE CLAMP	77285G	-	-	-
5	FUEL GAGE WIRE	82412	-	-	-
6	FUEL TANK MAIN TUBE SUB-ASSEMBLY	77209F	See step 6	-	-
7	FUEL TANK VENT HOSE SUB-ASSEMBLY	77404	See step 7	-	-
8	FUEL TANK PRESSURE SENSOR (VAPOR PRESSURE SENSOR)	89461	See step 8	-	-
9	REAR FLOOR SERVICE HOLE COVER	58325E	-	-	-

*A	for Type A	*B	for Type B
*1	TUBE JOINT CLIP	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part

Fig 2: Fuel Pump Installation Components (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
10	CONSOLE REAR END PANEL SUB-ASSEMBLY	58903A	-	-	-
11	BATTERY SERVICE COVER BOARD	58464D	-	-	-
12	NO. 3 BATTERY SERVICE COVER BOARD	58467J	-	-	-
13	REAR DOOR SCUFF PLATE LH	67918A	-	-	-
14	NO. 2 BATTERY SERVICE COVER BOARD	58466K	-	-	-
15	REAR DOOR SCUFF PLATE RH	67917A	-	-	-
16	REAR SEAT CUSHION LOCK HOOK	72693	-	-	-
17	REAR SEAT CUSHION ASSEMBLY	-	See step 17	-	-

•

Non-reusable part

Fig 3: Fuel Pump Installation Components (3 Of 3)

Callout - Procedure		Part Name Code
18	CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL	-	-	-	-
19	BATTERY SERVICE COVER PLATE	58491E	-	-	-
20	INSPECT FOR FUEL LEAK	-	-	-	See step 20
21	PERFORM INITIALIZATION	-	-	-	See step 21
22	INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL	-	-	-	See step 22