LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Fuel System - Service Information) >> Fuel Pump Ecu >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP CONTROL ECU BRACKET 

    Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

  2. INSTALL FUEL PUMP CONTROL ECU 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  3. INSTALL REAR SEAT SIDE GARNISH LH 
  4. INSTALL NO. 1 SIDE TRIM BASE COVER LH 
  5. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP 
  6. INSTALL NO. 3 BATTERY SERVICE COVER BOARD 
  7. INSTALL REAR DOOR SCUFF PLATE LH 
  8. INSTALL REAR SEAT ASSEMBLY 
    1. for Manual Seat:

      Refer to INSTALLATION [11/2021 - ]

    2. for Power Seat:

      Refer to INSTALLATION [11/2021 - ]

  9. INSTALL DECK BOARD ASSEMBLY 
  10. INSTALL TONNEAU COVER ASSEMBLY 
scientia non olet · About LEMON Manuals