LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Electric Parking Brake System - Diagnostic Codes, Symptom Tests & Circuit Tests) >> ELECTRIC PARKING BRAKE SYSTEM (for HEV Model) >> Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF [11/2021 - ] >> Procedure

Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OPERATION OF AUTO FUNCTION 
    1. Check that the AUTO function operates when the operating conditions are met.

      HINT: 

      Do not use the multi-information display to determine whether the AUTO function is operating or not.

      Result

      Result Proceed to
      The AUTO function operates A
      The AUTO function does not operate B

    Result: 

    A 

    REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [11/2021 - ] 

    Result: 

    B 

    GO TO Electric Parking Brake System AUTO Function Circuit. Refer to  Electric Parking Brake System AUTO Function Circuit [11/2021 - ]