LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Control System - Service Information) >> Vacuum Sensor >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VACUUM SENSOR ASSEMBLY 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 54 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 55 [03/2023 - ]
scientia non olet · About LEMON Manuals