LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Control System - Service Information) >> Throttle Body >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTERCOOLER ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  2. REMOVE NO. 2 AIR TUBE 
    1. GTY1077117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and No. 2 air tube from the throttle body with motor assembly and intake manifold.
      2. Remove the throttle body gasket from the No. 2 air tube.
  3. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY 
    NOTE:

    If the throttle body with motor assembly has been struck or dropped, replace it.
    1. GTY1076199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 4 WATER BY-PASS HOSE 
    1. GTY1076215Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 5 WATER BY-PASS HOSE 
    1. GTY1076179Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals