LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Emission Control System - Service Information) >> Monolithic Converter >> Removal [11/2021 - 03/2024] >> Procedure

Removal [11/2021 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    Refer to REMOVAL [11/2021 - 03/2023] , or refer to REMOVAL [03/2023 - 03/2024]

  2. REMOVE AIR FUEL RATIO SENSOR (for Sensor 1) 
    Refer to PROCEDURE - Step 9 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 10 [03/2023 - ]
  3. REMOVE AIR FUEL RATIO SENSOR (for sensor 2) 
    Refer to PROCEDURE - Step 2
  4. REMOVE NO. 1 TURBO INSULATOR 
    1. GTY1077941Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE EXHAUST PIPE CLAMP 
    1. GTY1078079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE CONVERTER WITH CATALYST ASSEMBLY 
    1. GTY1078088Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE TURBINE OUTLET ELBOW GASKET 
    1. GTY1078089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals