LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Control System - Diagnostics - Introduction (1 Of 4)) >> SFI System >> Precaution [11/2021 - ] >> Precaution [11/2021 - ]

Precaution [11/2021 - ]

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INITIALIZATION 
    NOTE:

    When the ECM is replaced, update the ECU security key.

    Refer to UPDATE ECU SECURITY KEY [11/2021 - ]

  2. PRECAUTIONS FOR DISCONNECTING CABLE FROM NEGATIVE (-) BATTERY TERMINAL 
    NOTE:
    • After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

      Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]

    • When disconnecting and reconnecting the battery.

      HINT: 

      When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

      Refer to AUTOMATIC LEARNING CHART [11/2021 - ]

    • To prevent the key from being locked in the vehicle, make sure to enter e-latch inspection mode and enable the manual release handle before disconnecting the cable from the negative (-) battery terminal.

      Refer to INSPECTION MODE PROCEDURE [11/2021 - ]

  3. WHEN USING GTS 
    WARNING:

    Observe the following items for safety reasons:

    • Before using the GTS, read the instruction manual.
    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One drives the vehicle, and the other operates the GTS.
  4. COOLING FAN SYSTEM 
    WARNING:

    The cooling fans may continue to operate after the engine switch is turned off. Be careful not to bring your hands or tools near the cooling fans while they are operating.

    HINT: 

    The cooling fans may continue to operate for up to 6 minutes after the engine switch is turned off if the following conditions are met after driving under high load:

    • The engine coolant temperature is extremely high.
    • The outside air temperature is extremely high.