LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Hybrid Control System - Diagnostic Codes (4 Of 5)) >> Hybrid Control System >> DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" (Hybrid/EV Battery Local Bus) Missing Message; DTC U0110-87: Lost Communication with Drive Motor Control Module "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U1107-87: Lost Communication with Power Management Module Missing Message; DTC U111A-87: Lost Communication with ECM/PCM "A" (ch2) Missing Message; DTC U1154-87: Lost Communication with Drive Motor Control Module "A" (ch2) Missing Message; DTC U1170-87: Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message; DTC U117B-87: Lost Communication with Hybrid/EV Battery Energy Control Module "A" (ch2) Missing Message [11/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

If the hybrid vehicle control ECU detects a problem with CAN communication with the ECU, it will illuminate the MIL and store a DTC.

scientia non olet · About LEMON Manuals