DTC U0140-00: Lost Communication with Body Control Module (Sub) Missing Message; DTC U0155-86: Lost Communication with Instrument Panel Cluster (IPC) Control Module Signal (some circuit quantity, reported via serial data) Invalid; DTC U0293-00: Lost Communication with Hybrid/EV Powertrain Control Module from Gear Shift Control Module "A"; DTC U1107-00: Lost Communication with Power Management Module (Gear Shift Control Module "A"); DTC U114F-00: Lost Communication with Power Integration Module (System 2) Missing Message; DTC U1170-00: Lost Communication with Brake System Control Module (Gear Shift Control Module "A") [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC OUTPUT (HEALTH CHECK)
Pre-procedure1
- Turn the ignition switch to ON.
Procedure1
- Using the GTS, perform a Health Check.
Result
Proceed to NEXT Post-procedure1
- Turn the ignition switch off.
Result:
NEXT
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - ]
- Turn the ignition switch to ON.