Confirmation Driving Pattern
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the All Readiness check procedure.
- Turn the ignition switch to ON (READY).
- With the brake pedal depressed, perform a shift operation then change the shift state to N. (*1)
- Press the P position switch to change the shift state to P. (*2)
- Perform the above steps (*1 and *2) several times.