LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P178A-14: Gear Shift Control Module "B" Wake-up Circuit Short to Ground or Open [11/2021 - ] >> Description

DTC P178A-14: Gear Shift Control Module "B" Wake-up Circuit Short to Ground or Open [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The shift actuator ECU starts when it receives a WAKE signal from the shift control ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P178A-14 Gear Shift Control Module "B" Wake-up Circuit Short to Ground or Open When the auxiliary battery voltage and BAT1 terminal voltage are a certain value or more, a low WAKE terminal voltage is continuously detected
(1 trip detection logic)
  • Shift control actuator assembly (shift actuator ECU)
  • Transmission floor shift assembly (shift control ECU)
  • Wire harness or connector
Does not come on Multi-information Display Error Message 
  • Displayed
Hybrid Control A SAE: P178B