Confirmation Driving Pattern
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.
- This DTC indicates that a malfunction of the integrated capacitor is detected and a malfunction signal is being sent to the hybrid vehicle control ECU.
The malfunction signal is not cleared by the GTS but will be cleared when the internal voltage of the integrated capacitor is completely discharged after the ignition switch is turned off.
Therefore, when rechecking for DTCs after replacing components, clearing the DTCs, etc., as it is necessary to clear the malfunction judgement signal from the integrated capacitor, check for or clear DTCs after waiting 10 minutes or more after turning the ignition switch off.
- Turn the ignition switch to ON and wait for 10 seconds or more.
- Turn the ignition switch off and wait for 10 minutes or more.
- Turn the ignition switch to ON.