LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P1770-62: Door Lock Switch / Curtesy Switch Signal Compare Failure [11/2021 - ] >> Description

DTC P1770-62: Door Lock Switch / Curtesy Switch Signal Compare Failure [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The integrated capacitor backs up the electronic shift lever system, advanced parking system and electric door lock system and is used to prevent vehicle roll-away, occupant lock-in during a collision, and ensures braking force when supply power from the auxiliary battery is lost.

The shift control ECU is connected to the front door lock with motor assembly (driver side) (courtesy SW) by direct line via the integrated capacitor and receives door open/close signals.

It also receives door open/close signals via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P1770-62 Door Lock Switch / Curtesy Switch Signal Compare Failure Even though the driver door signal via CAN communication indicates open, the DROP terminal signal indicates closed 4 times or more
(1 trip detection logic)
  • Transmission floor shift assembly (shift control ECU)
  • Integration control supply (integrated capacitor)
  • Front door lock with motor assembly (driver side)
  • Wire harness or connector
Does not come on Multi-information Display Error Message 
  • Displayed
Hybrid Control A SAE: P1770