LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P1769-00: Gear Shift Control Module "A" A/D Processing Performance [11/2021 - ] >> Confirmation Driving Pattern

Confirmation Driving Pattern

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the All Readiness check procedure.

  1. Turn the ignition switch to ON and wait for 1 minute or more.
scientia non olet · About LEMON Manuals