DTC P08A6-62: Gear Lever Position Sensor Signal Compare Failure [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The shift lever assembly has 3 built-in shift sensors. The shift control ECU monitors for differences between the angle information of the shift sensors and detects malfunctions.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P08A6-62 | Gear Lever Position Sensor Signal Compare Failure | With the auxiliary battery at a certain value or more, a difference between the angle information of the shift sensors is continuously detected (1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P08A6 |