LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Heating / Air Conditioning System - Diagnostic Codes, Circuit Tests & Symptom Tests) >> AIR CONDITIONING SYSTEM (for HEV Model) >> A/C Switch Indicator does not Turn On [11/2021 - ] >> Procedure

A/C Switch Indicator does not Turn On [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK MALFUNCTION STATUS 
    1. Check the malfunction status of switch indicators on the radio and display receiver assembly.

      Result

      Result  Proceed to 
      A/C switch indicators are not always illuminated A
      A/C switch indicators are not illuminated only immediately after starting the hybrid control system B

    Result: 

    GO TO INITIALIZATION. Refer to  INITIALIZATION [11/2021 - ] 

    Result: 

    See step  2

  2. READ VALUE USING GTS 
    1. Read the Data List according to the display on the GTS.

      Body Electrical > Air Conditioner > Data List 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Ambient Temperature Sensor Ambient temp. sensor (thermistor assembly) -327.68 to 327.67°C Actual ambient temperature displayed Ambient temp. sensor (thermistor assembly) circuit malfunction

      Body Electrical > Air Conditioner > Data List 

      Tester Display
      Ambient Temperature Sensor

      OK

      The display is as specified in the normal condition column (0°C (32°F) or higher).

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    INSPECT REFRIGERANT PRESSURE WITH MANIFOLD GAUGE SET. Refer to  ON-VEHICLE INSPECTION [11/2021 - ] 

    Result: 

    NG 

    GO TO OTHER DIAGNOSIS PROCEDURE (Ambient Temperature Display System). Refer to  Ambient Temperature Display System [11/2021 - ]