LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Control System - Diagnostic Codes (P0524-P064A)) >> SFI System >> DTC P060E-49: Internal Control Module Throttle Position Performance Internal Electronic Failure [11/2021 - 03/2022] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The ECM monitors the signals received from the No. 1 throttle position sensor. As the ECM monitors the VTA1 signal of the No. 1 throttle position sensor, if these signals do not correlate, a DTC will be stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P060E-49 Internal Control Module Throttle Position Performance Internal Electronic Failure Either of the following conditions is met (1 trip detection logic):
  • ECM main CPU malfunction.
  • ECM sub CPU malfunction.
ECM Comes on SAE Code: P060E