LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Automatic Transaxle System - Diagnostic Codes (1 Of 3)) >> Automatic Transaxle System >> DTC P0740-7E: Torque Converter Clutch Actuator Stuck On [11/2021 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

Any of the following conditions are met: OFF malfunction (A), (B) or (C)

ON MALFUNCTION (A):

Engine speed - Turbine speed 170 rpm or more
ON MALFUNCTION (B):

Neutral state flag ON
ON MALFUNCTION (C):

Solenoid (SLT) valve ON malfunction

HINT: 

NEUTRAL STATE FLAG:

Turbine speed - output speed x (ECM selected gear ratio) 1000 rpm or more