LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Smart Access System (For Start) - Diagnostic Codes & Symptom Tests (1 Of 2)) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, HEV Model) >> DTC B228B-00: Battery Circuit or Ground Circuit Energization Malfunction [11/2021 - ] >> Description

DTC B228B-00: Battery Circuit or Ground Circuit Energization Malfunction [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is stored when there is a malfunction in the certification ECU (smart key ECU assembly) auxiliary battery power supply circuit or ground circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B228B-00 Battery Circuit or Ground Circuit Energization Malfunction A malfunction is detected in the certification ECU (smart key ECU assembly) auxiliary battery power supply circuit or ground circuit. (1-trip detection logic*)
  • AM2 fuse
  • Wire harness or connector
DTC Output Confirmation Operation: 
  1. Drive the vehicle.
  1. *: Only detected while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
The hybrid control system stopped while driving. -
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B228B-00 -