LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Hybrid Transaxle System (P810) - Service Information) >> Relay >> On-Vehicle Inspection [11/2021 - 03/2024] >> Procedure

On-Vehicle Inspection [11/2021 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT OIL PUMP MOTOR RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY650405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Oil Pump Motor Relay

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the oil pump motor relay.

scientia non olet · About LEMON Manuals