Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

The engine assembly with hybrid vehicle transaxle assembly is very heavy. Be sure to follow the procedure described in the repair information, or the engine lifter may suddenly drop.

COMPONENTS (INSTALLATION)

Fig 1: Hybrid Vehicle Transaxle Installation Components [03/2024 - ] (1 Of 7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	OUTLET MOTOR HOSE	G1282B	See step 1	-	-

NO. 2 MOTOR COOLING PIPE

Fig 2: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (2 Of 7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
2	TRANSAXLE HOUSING TUBE CONNECTOR	30900K	See step 2	-	-
3	TRANSAXLE BREATHER PLUG	30900N	-	-	-
4	STUD BOLT	-	See step 4	-	-
5	TRANSAXLE HOUSING PLUG	-	-	-	-
6	WIRE HARNESS CLAMP BRACKET	-	-	-	-
7	NO. 3 INVERTER BRACKET	G9216	See step 7	-	-

*1	O-RING	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part
	Toyota Genuine ATF WS		Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
*	Precoated part	-	-

Fig 3: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (3 Of 7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
8	MOTOR COOLING PIPE ASSEMBLY	-	See step 8	-	-
9	NO. 2 TRANSMISSION OIL COOLER BRACKET	32913J	See step 9	-	-
10	MOTOR COOLING COOLER	G125A	See step 10	-	-
11	OUTLET MOTOR HOSE	G1282B	See step 11	-	-

*1	OIL COOLER UNION BOLT	*2	GASKET
*3	NO. 1 MOTOR COOLING HOSE	-	-
	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf)		N.m (kgf/cm, ft.lbf): Specified torque
•	Non-reusable part	-	-

Fig 4: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (4 Of 7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
12	MOTOR CABLE	G1148	See step 12	-	-
13	TERMINAL CAP	82823M	See step 13	-	-
14	CONNECTOR COVER	82821T	See step 14	-	-
15	HYBRID VEHICLE TRANSAXLE ASSEMBLY	30900	See step 15	-	-

	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf)		N.m (kgf/cm, ft.lbf): Specified torque
•	Non-reusable part	-	-

Fig 5: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (5 Of 7)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
16	REAR ENGINE MOUNTING BRACKET	12303	See step 16	-	-
17	REAR ENGINE MOUNTING INSULATOR	12371A	See step 17	-	-
18	FRONT ENGINE MOUNTING BRACKET	12311A	See step 18	-	-
19	FRONT ENGINE MOUNTING INSULATOR	12361A	-	-	-
20	FRONT FRAME ASSEMBLY	51100G	-	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf)

N.m (kgf/cm, ft.lbf): Specified torque

Fig 6: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (6 Of 7)

Callout - Procedure		Part Name Code
21	FLYWHEEL HOUSING SIDE COVER	11363A	-	-	-
22	STARTER HOLE INSULATOR	28193	-	-	-
23	TRANSAXLE UNDER STOPPER BRACKET	33185B	See step 23	-	-

N.m (kgf/cm, ft.lbf): Specified torque

Fig 7: Hybrid Vehicle Transaxle Installation Components With Torque Specifications [03/2024 - ] (7 Of 7)

Callout - Procedure		Part Name Code
24	HV AIR CONDITIONING WIRE	821H2	-	-	-
25	ENGINE WIRE	82121	See step 25	-	-
26	STEERING GEAR HEAT INSULATOR	45319	See step 26	-	-
27	ENGINE ASSEMBLY WITH TRANSAXLE	-	-	-	-
28	PERFORM RESOLVER LEARNING	-	-	-	See step 28

N.m (kgf/cm, ft.lbf): Specified torque