LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine Control System - Diagnostic Codes (P0606-P11EA)) >> SFI System >> DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [11/2021 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored None
All of the following conditions are met -
Accelerator opening angle 56.542° or more
STP signal ON
Vehicle speed 40 km/h (25 mph) or more
Accelerator opening angle value No malfunction
STP No malfunction
Wheel speed No malfunction
Ignition switch ON