LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Control System - Diagnostic Codes (P0460-P0604)) >> SFI System >> DTC P0500-31: Vehicle Speed Sensor "A" No Signal [03/2024 - ] >> Procedure

DTC P0500-31: Vehicle Speed Sensor "A" No Signal [03/2024 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0500-31) 
    1. Perform the Health Check using the GTS.
    2. Read the DTCs.

      Result

      Result Proceed to
      P0500-31 and other DTCs are output A
      P0500-31 is output B

      HINT: 

      If any DTCs other than P0500-31 are output, troubleshoot those DTCs first.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2024 - ] 

    Result: 

    See step  2

  2. GO TO CAN COMMUNICATION SYSTEM 
    1. Refer to the CAN Communication System.

      HINT: 

      Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END