Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
P011A
| All of the following conditions are met | - |
| Time after key-off | 5 hours or more |
| ECM | Started by soak timer |
| Ignition switch | Off |
| Either of the following conditions is met | A or B |
| A. Engine coolant temperature sensor (for outlet side) | -10°C (14°F) or higher |
| B. Engine coolant temperature sensor (for cylinder head side) | -10°C (14°F) or higher |
| Battery voltage | Higher than 8 V |
| Engine coolant temperature sensor (for outlet side) fail (P0117, P0118) | Not detected |
| Engine coolant temperature sensor (for cylinder head side) fail (P2184, P2185) | Not detected |
| Soak timer fail (P2610) | Not detected |
P111A
| All of the following conditions are met | - |
| Arrive at after engine stop | 5 hours or more |
| ECM | Started by soak timer |
| Ignition switch | Off |
| Either of the following conditions is met | A or B |
| A. Engine coolant temperature sensor (for outlet side) | -10°C (14°F) or higher |
| B. Engine coolant temperature sensor (for water inlet housing side) | -10°C (14°F) or higher |
| Battery voltage | Higher than 8 V |
| Engine coolant temperature sensor (for outlet side) circuit fail (P0117, P0118) | Not detected |
| Engine coolant temperature sensor (for water inlet housing side) circuit fail (P01E5, P01E6) | Not detected |
| Soak timer fail (P2610) | Not detected |