LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P1753-87: Lost Communication with Gear Shift Control Module "B" (Local-CAN) Missing Message [11/2021 - ] >> Description

DTC P1753-87: Lost Communication with Gear Shift Control Module "B" (Local-CAN) Missing Message [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

The shift control ECU receives or sends a signal to or from the shift actuator ECU via CAN.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P1753-87 Lost Communication with Gear Shift Control Module "B" (Local-CAN) Missing Message When the ignition switch is ON and the battery voltage is a certain value or more, a communication malfunction is continuously detected in the CAN (SBW BUS) by the shift actuator ECU
(1 trip detection logic)
  • Shift control actuator assembly (shift actuator ECU)
  • Transmission floor shift assembly (shift control ECU)
  • Harness and connector
Comes on Multi-information Display Error Message 
  • Displayed
Transmission A SAE: P1753