DTC P091A-2B: Gear Shift Position Circuit "B" Range/Performance Signal Cross Coupled [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the ECM stores a DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P091A-2B | Gear Shift Position Circuit "B" Range/Performance Signal Cross Coupled | When BAT1 voltage is normal, an absolute angle sensor value malfunction continues for a certain amount of time (1 trip detection logic) |
Shift control actuator assembly (shift actuator ECU) | Comes on | Multi-information Display Error Message
|
Transmission | A | SAE: P091B |