LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronically Controlled Brake System - Diagnostic Codes (1 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C0063-1F: Yaw Rate Sensor Circuit Intermittent; DTC C0520-1F: Multi-axis Acceleration Sensor Module "A" Circuit Intermittent [11/2021 - ] >> Procedure

DTC C0063-1F: Yaw Rate Sensor Circuit Intermittent; DTC C0520-1F: Multi-axis Acceleration Sensor Module "A" Circuit Intermittent [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CLEAR DTC 
    1. Clear the DTCs.

      Chassis > Brake/EPB > Clear DTCs 

    2. Turn the ignition switch off.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. RECONFIRM DTC 
    1. Based on the Freeze Frame Data and interview with the customer, attempt to reproduce the conditions when the malfunction occurred.
    2. Check if the same DTC is output.

      Chassis > Brake/EPB > Trouble Codes 

      Result

      Result Proceed to
      DTCs C0063-1F and C0520-1F are not output. A
      DTCs C0063-1F and/or C0520-1F are output. B

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - ] 

    Result: 

    REPLACE AIRBAG SENSOR ASSEMBLY. Refer to  REMOVAL [11/2021 - 03/2024]  , or refer to  REMOVAL [03/2024 - ]