LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake / Exhaust System - Service Information >> Intake Manifold >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  2. REMOVE E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR) 

    Refer to REMOVAL [11/2021 - ]

  3. DISCONNECT ENGINE WIRE 
    1. GTY1080331Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 3
  5. REMOVE EGR VALVE ADAPTER GASKET 

    Refer to PROCEDURE - Step 4

  6. REMOVE EGR INLET GASKET 

    Refer to PROCEDURE - Step 5

  7. DISCONNECT NO. 5 WATER BY-PASS HOSE 
    1. GTY1080553Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. DISCONNECT NO. 3 WATER BY-PASS PIPE 
    1. GTY1080082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the bolt and disconnect the No. 3 water by-pass pipe from the intake manifold.
  9. REMOVE NO. 2 WATER BY-PASS PIPE 
    1. GTY1080209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 2 bolts (A) and separate the No. 2 water by-pass pipe from the intake manifold.
      2. Remove the bolt (B) and No. 2 water by-pass pipe from the cylinder block sub-assembly.
  10. REMOVE FUEL VAPOR FEED HOSE ASSEMBLY 
    1. GTY1080337Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE INTAKE MANIFOLD 
    1. w/ Stud Bolt:
      GTY1079713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 3 bolts and 2 nuts.
      2. Using an E8 "TORX" socket wrench, remove the 2 stud bolts and intake manifold from the cylinder head sub-assembly.
    2. w/o Stud Bolt:
      GTY1080501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE NO. 1 INTAKE MANIFOLD TO HEAD GASKET 
    1. GTY1079945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 ENGINE COVER 
    1. GTY1079944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE VACUUM HOSE 
    1. GTY1080504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals