Installation [11/2021 - ]: Procedure
- INSTALL ENGINE OIL LEVEL SENSOR
- Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Remove any dirt or foreign matter from the engine oil level sensor connector installation hole.
- Apply a light coat of engine oil to the O-ring of the engine oil level sensor.
- Install a new clip to the engine oil level sensor.
- Connect the engine oil level sensor connector.
- Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.
- INSTALL NO. 2 OIL PAN SUB-ASSEMBLY
Refer to PROCEDURE - Step 12 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 12 [03/2022 - ] - ADD ENGINE OIL
Refer to PROCEDURE - Step 5 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 5 [03/2023 - ]
- INSPECT FOR ENGINE OIL LEAK
Refer to PROCEDURE - Step 6 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 6 [03/2023 - ]
- CHECK ENGINE OIL LEVEL
Refer to PROCEDURE - Step 1 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 1 [03/2024 - ]
- INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf)