Installation [11/2021 - ]: Procedure

SET EGR VALVE ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Set the EGR valve assembly to the camshaft housing.
HINT:

At this time, do not install the parts with bolts.

INSTALL EGR VALVE ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using an 8 mm socket wrench, install the EGR valve assembly to the camshaft housing with the 2 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)

INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY

Using an 8 mm socket wrench, install the No. 1 EGR pipe sub-assembly to the intake manifold and EGR valve assembly with the 4 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)

CONNECT ENGINE WIRE
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Refer to PROCEDURE - Step 5
CONNECT NO. 2 VENTILATION HOSE

Refer to PROCEDURE - Step 6
CONNECT VACUUM HOSE
INSTALL INLET AIR CLEANER ASSEMBLY

Refer to PROCEDURE - Step 8
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Refer to PROCEDURE - Step 48
INSTALL RADIATOR UPPER AIR GUIDE PLATE
ADD ENGINE COOLANT (for Engine)
Refer to PROCEDURE - Step 5
INSPECT FOR COOLANT LEAK (for Engine)

Refer to ON-VEHICLE INSPECTION [11/2021 - ]
INSPECT FOR EXHAUST GAS LEAK
Refer to PROCEDURE - Step 4