LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System - Diagnostic Codes (2 Of 2), Symptom Tests & Circuit Tests >> Meter / Gauge System >> Operating Light Control Rheostat does not Change Light Brightness [11/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
  • When replacing the combination meter assembly, update the ECU security key.

    Refer to UPDATE ECU SECURITY KEY [11/2021 - ]

HINT: 

Even when the light control rheostat switch is not operated, the brightness of the meter illumination is dimmed automatically when the taillights illuminate.