LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 250 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> WASHER NOZZLE (for Rear Side) >> Adjustment [11/2021 - ] >> Procedure

Adjustment [11/2021 - ]: Procedure

  1. ADJUST REAR WASHER NOZZLE 
    1. Using a screwdriver, adjust the nozzle jet of the rear washer nozzle so that the contact area is within the standard.
      NOTE:

      Do not use a safety pin or other pointed tool.

      Doing so may damage the inside of the washer nozzle.

      GTY1069911Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals