LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> LX 600 Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Engine Oil Temperature Sensor >> Installation [12/2021 - ] >> Procedure

Installation [12/2021 - ]: Procedure

  1. INSTALL TEMPERATURE SENSOR 
    1. GTY1074328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Install a new gasket to the temperature sensor.
      2. Using a 19 mm deep socket wrench, install the engine oil temperature sensor.

        Torque: 19.6 N.m (200 kgf/cm, 14 ft.lbf) 

        NOTE:

        If the temperature sensor has been struck or dropped, replace it.

      3. Connect the temperature sensor connector.
  2. INSTALL GENERATOR ASSEMBLY 
  3. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  4. INSPECT FOR OIL LEAK 

    Refer to PROCEDURE - Step 10

scientia non olet · About LEMON Manuals