Caution / Notice / Hint

NOTE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
The following troubleshooting procedure is based on the assumption that the SFI system is normal. Confirm that the SFI system is not malfunctioning before performing the following procedure.
w/ Canister Pump Module:

Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - 10/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]

w/o Canister Pump Module:

Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - ]