Installation [12/2021 - ]: Procedure

INSTALL METER MIRROR SUB-ASSEMBLY

NOTE:

Do not lift up the meter mirror sub-assembly while holding the metal bracket only. Also, before installing the meter mirror sub-assembly on the vehicle, handle the bracket very carefully to prevent its deformation and misalignment.

Attach the clamp and connect the connector.
Install the meter mirror sub-assembly with the 4 screws.

INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY
INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
Refer to INSTALLATION [12/2021 - ]
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [12/2021 - ]