LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> LS 500h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Clock System - Diagnostics & Symptom Tests >> Clock System >> Customize Parameters [10/2017 - ] >> Customize Parameters [10/2017 - ]

Customize Parameters [10/2017 - ]

  1. CUSTOMIZING WITH MULTI-DISPLAY 
    1. Turn the power switch on (IG).
    2. Time zone setting
      1. Using the multi-display, select "Setup", "General", "Clock", and then time zone and change the customize setting.
        Item Default Content Setting Relevant ECU
        Time Zone Auto Setting for clock time zone Pacific/Mountain/Eastern/Atlantic/Newfoundland/Hawaii/Alaska/Central/Other/Auto Radio receiver assembly

        HINT: 

        If "Auto" is selected, the time zone will automatically be selected by the current vehicle position.

    3. Daylight saving time setting
      1. Using the multi-display, select "Setup", "General", "Clock", and then daylight saving time and change the customize setting.
        Item Default Content Setting Relevant ECU
        Daylight Saving Time ON Setting for clock daylight saving time ON/OFF Radio receiver assembly
    4. Auto adjust by GPS setting
      1. Using the multi-display, select "Setup", "General", "Clock", and then auto adjust by GPS and change the customize setting.
        Item Default Content Setting Relevant ECU
        Auto Adjust by GPS On Setting for clock auto adjust by GPS ON/OFF Radio receiver assembly

        HINT: 

        • If "ON" is selected, the clock will automatically be adjusted by the clock function of navigation system.
        • If "OFF" is selected, the clock can be manually adjusted.
    5. Manual clock setting
      1. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "OFF" and then hours and change the customize setting.
        Item Default Content Setting Relevant ECU
        Hours - Setting for manual clock adjustment of hour -/+/AM/PM Radio receiver assembly
      2. Using the multi-display, select "Setup", "General", "Clock", select "auto adjust by GPS" to "OFF" and then minutes and change the customize setting.
        Item Default Content Setting Relevant ECU
        Minutes - Setting for manual clock adjustment of minute -/+/:00 Radio receiver assembly

        HINT: 

        If ":00" is selected, the minute value will be rounded up or down to the nearest hour.

scientia non olet · About LEMON Manuals