Removal [12/2017 - ]: Procedure

REMOVE FRONT DOOR TRIM UPPER COVER LH
Refer to PROCEDURE - Step 4 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 4 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 4 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 4 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 4 [10/2023 - ]
REMOVE FRONT DOOR ARMREST COVER LH
Refer to PROCEDURE - Step 5 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 5 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 5 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 5 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 5 [10/2023 - ]
REMOVE FRONT DOOR NO. 2 ARMREST COVER LH
Refer to PROCEDURE - Step 6 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 6 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 6 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 6 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 6 [10/2023 - ]
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 7 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 7 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 7 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 7 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 7 [10/2023 - ]

REMOVE OUTER MIRROR INSTALL HOLE COVER LH

Detach the clamp.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE FRONT MULTIPLEX NETWORK DOOR ECU LH
Refer to PROCEDURE - Step 25 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 25 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 25 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 25 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 25 [10/2023 - ]

REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH

Detach the clamp.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	w/ Panoramic View Monitor System

Remove the 2 hole plugs.

Remove the 3 nuts.

NOTE:

Hold the outer rear view mirror assembly LH with one hand so that it does not drop.