Removal [03/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FRONT DOOR TRIM COVER SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 4 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 4 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 4 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 4 [05/2023 - ]
- REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 6 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 6 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 6 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 6 [05/2023 - ]
- REMOVE SEAT MEMORY SWITCH
- Disconnect the connector.
Connector Screw - Remove the 2 screws.
- Using moulding remover A, push in the direction indicated by the arrow shown in the illustration, detach the claws and remove the seat memory switch.
- Remove the bracket from the front door trim board sub-assembly LH.
Remove in this Direction
- Disconnect the connector.