Removal [07/2020 - ]: Procedure
- REMOVE COURTESY LIGHT ASSEMBLY
- for LH Side:
- Apply protective tape around the courtesy light assembly.
Remove in this Direction Protective Tape - Insert moulding remover A between the courtesy light assembly and front door trim board from the front of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
- Disconnect the connector.
- Apply protective tape around the courtesy light assembly.
- for RH Side:
- Apply protective tape around the courtesy light assembly.
Remove in this Direction Protective Tape - Insert moulding remover A between the courtesy light assembly and front door trim board from the rear of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
- Disconnect the connector.
- Apply protective tape around the courtesy light assembly.
- for LH Side: