LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> LC 500 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information (Convertible) >> License Plate Light Assembly >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. REMOVE REAR BUMPER ASSEMBLY 

    Refer to REMOVAL [07/2020 - ]

  2. REMOVE BACK DOOR FINISH PANEL COVER LH 
    1. Using a screwdriver, detach the claw.

      HINT: 

      Tape the screwdriver tip before use.

    2. Detach the hook to remove the back door finish panel cover LH.
      GTY963504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape - -
  3. REMOVE BACK DOOR FINISH PANEL COVER RH 

    HINT: 

    Use the same procedure described for the LH side.

  4. REMOVE LICENSE PLATE LIGHT SUB-ASSEMBLY 
    1. Disconnect the 2 connectors.
      GTY825857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the retainer.
      GTY832720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    3. Detach the claw to remove the license plate light sub-assembly.
scientia non olet · About LEMON Manuals